Dogtown Skateboards
Dogtown Skates - P.C. Tail Tap Model

• 8.5" x 30"
• Flat
• Single Kick

The long awaited much anticipated Dogtown PC Tail Tap deck is finally available here at tailtap.com.

These are going quick so don't wait to long to get yours. These are great old school classic that were originally produced in 1978. Decks are are all natural color with no top graphic.

| BUY NOW - $69.00 | view cart / checkout |

Dogtown Skates - Jesse Martinez Pool Model

• 8.75" x 31.5"
• 15.5" wheelbase

An entire new shape for Jesse! A solid 15.5" wheelbase and nice smooth concave throughout with classic DTS graphics. Classic style shape with a hint of modern. Grab one!
| BUY NOW - $64.95 | view cart / checkout |

Temporarily Sold Out

Dogtown Skates - Shit List Deck


• 9.125" x 37.5"
• Wheelbase 21"

Nice, longer style 7 ply deck with concave, kicktail and a slight up turn in the nose. Made in the USA!
| SOLD OUT - $67.95 | view cart / checkout |

Dogtown Skates - Bandana Model

• 9.125" x 37.5"
• Wheelbase 21"

Nice, longer style 7 ply deck with concave, kicktail and a slight up turn in the nose. Great graphic and made in the USA of course.
| BUY NOW - $67.95 | view cart / checkout |

Dogtown Skates -
For Life Complete Model


• 39.5" x 9.25"
• 21.5" wheelbase

A great everyday rider assembled with the ultra responsive, new super sized 6.0 Bennett Vector model trucks. These are the new powder coated version with high rebound urethane bushings. Wheels are Bennett Alligator 72mm / 81 duro hardness with precision bearings. The riser pads are half inch, giving some lift to the trucks as to avoid any wheel bite. Grip tape is custom laser cut for us and available no where else but here at tailtap.com. This is a high end USA made complete for skaters of all abilities from beginner to expert...our DT For Life complete simply works! Arrives to you assembled, tuned, gripped and ready to rip.
| BUY NOW - $169.00 | view cart / checkout |

Temporarily Sold Out

NEW DOGTOWN SKATES

Jamie O'Brien Complete


Construction: 5 ply with fiberglass polymer composite weave
Length: 33.25 inches
Width: 8.5 inches
Wheelbase: 24.75 inches

Nice, mid size cruiser board with plenty of room to move around on. Our Jamie O'Brien complete is hand assembled, tuned and polished right here at Tailtap's Southern California headquarters. Built with the ultra quick turning Bennett Vector model trucks and set up with half inch risers, you can be sure of making tight turns all while avoiding any wheel bite. The wheels we have chosen are the new GFH 66mm / 78 durometer "Fatties" for their grip, speed and durability. To keep your wheels spinning we installed precision abec 5 bearings. We top this aggressively shaped composite and wood deck off with a sheet of our exclusive laser cut grip tape, something you won't find anywhere else. This is a fun complete with a slight camber that adds a predictable flex for pumping in and out of turns. Our Dogtown complete arrives to you assembled, tuned and ready to rip. Another great turn key complete from your one stop shop - Tailtap.com.
| SOLD OUT - $159.00 | view cart / checkout |

NEW DOGTOWN SKATES

Matt Archbold Complete


Length: 36.75 inches
Width: 9.25inches
Wheelbase:
23.5 inches

Looking for a fun spring and summer commuter style longboard? Our new Dogtown Archbold model is just what you may need! Each are built by hand at the tailtap shop in Southern California and feature the reliable and smooth turning Randall RII, 150mm trucks with half inch riser pads that will stop any nasty wheel bite. For wheels we have chosen the new 66mm / 78 durometer Fatties by GFH which we have found to be fast, long lasting and grippy. Bearings are precision abec 5 and the deck itself is topped off with a sheet of laser cut grip - a Tailtap exclusive that you will not find anywhere else. A great complete at a great price that arrives to you assembled, tuned and ready to ride!
| BUY NOW - $159.00 | view cart / checkout |



Dog Town EXCLUSIVE! Three NEW Tailtap / Dogtown Completes


You can't get these custom taped completes anywhere else but at tailtap.com Choose from either the Dog Town Sunburst (8.625" x 30") with OJ Hot Juice wheels or the Jim Muir Red Dog (9" x 30") with Alligator wheels or the Wes Humpston Bull Dog model (10" x 30.25") with Tunnel Rocks! Each decks is hand assembled using Bennett Vector model trucks, .25 inch riser pads, precision bearings, philips head hardware and gripped with Tailtap's exclusive Dog Town die cut grip tape. Each of these completes are great riding decks and arrive to you fully assembled and ready to rip. Grab one today...they may be gone tomorrow!
| BUY NOW - $169.00 | view cart / checkout |

DogTown Sunburst Model

• 8.625" x 30"

If an old school late 70's deck is what you're after this is one you'll want to take a close look at. On the Sunburst you'll find slight concave, a single style kick tail and a long and stable 16.5 inch wheelbase. Graphics have that hand done look and really look great on the bottom of this one. Made in the USA and very authentic the DTS Sunburst gets two thumbs up by the Tap staffers.

*Add custom cut DT grip for only $14.00.This grip is exclusive to tailtap.com,. you can not get it anywhere else but here!
| BUY NOW - $55.95 | view cart / checkout |
| With Grip - SOLD OUT - $69.95 | view cart / checkout |

Dogtown - Cross Logo Deck

• 7.5" x 31.25"

This Cross logo deck is DTS's version of the modern day double ender street deck. Personally we find these tongue depressor style shapes not that exciting, seen one seen them all kind of thinking. However, if you are into street skating and like a deck that has a nose and tail that look the same then you may as well have the bottom say Dogtown. This deck would also look good hanging on a wall, we like the classic DTS cross logo.
| BUY NOW - $55.95 | view cart / checkout |

Dogtown Bulldog "Vintage" Deck

• 10" x 30.25"

Nice updated graphic on a real classic. The shape and concave of the "Vintage" deck is the same as the OG Bulldog only the graphic has been tweaked to look old and faded - a real nice touch and first class looking retro rider. If you're a collector or just a fan of DTS, you will want to add this one to your quiver.
| BUY NOW - $66.50 | view cart / checkout |

Dogtown - Reddog "Vintage" Deck

• 9" x 30"

This Reddog "Vintage" is a new twist on the classic OG style Reddog deck. Size, shape and concave remain untouched - only the graphic has been distressed and tweaked to appear worn and faded. A welcome addition to a classic line of decks.
| BUY NOW - $66.50 | view cart / checkout |

NEW Ready to Rip Dogtown Completes!

A Tail Tap Exclusive!

Dogtown Wes "Bull Dog" Humpston model


This Bull Dog features a single kick with very slight concave. Our Red Dog complete measures in at 10" x 30.25" and will perform best in park and pool situations but also works great for simply cruising sidewalks and streets. We have tried to keep our DT completes as period correct and "retro" as possible by using Tracker Trucks and Tunnel Rocks wheels(both are high quality made in the USA components), precision bearings and .25 inch riser pads also by Tracker. Every Dog Town complete arrives to your door grip tape applied and ready to rip. Please specify wheel hardness at check out
| BUY NOW - $159.00 | view cart / checkout |

Dogtown Jim "Red Dog" Muir Model

A great Classic style pool, park and sidewalk shredder that measures 9" x 30" featuring a single kick tail. The Red Dog is assembled with Tracker FulTrack trucks, Tracker .25 inch risers and Tracker abec 5 precision bearings. For the wheels, we have chosen the re-issued Tunnel Rocks that everyone is raving about, and you even have your choice of wheel color and hardness. Each complete arrives to you assembled with grip tape applied. Please specify wheel hardness at check out.
| BUY NOW - $159.00 | view cart / checkout |

Temporarily Sold Out

Dogtown - Red Dog Pool Design


Construction:
7 ply maple, pressed in LA, California.
Length: 32.5 inches.
Width: 9 inches.
Wheelbase: 15.5 inches.
Tail: 6.25 inches.
Nose: 6.25 inches.
Concave: smooth.
Graphic: New twist on a classic, we like it.
Other: Great new modern addition to the DTS line up. We always like to see decks coming out with some shape and this new Red Dog has the classic lines and square tail that you would expect from DTS. A Great modern pool and park axe. Actual colors may vary.
| SOLD OUT - $55.95 | view cart / checkout |

Temporarily Sold Out

Dogtown - Jamie O'Brien Pin Tail Model


Construction: 5 ply with fiberglass, poly mere composite weave
Length: 33.25 inches.
Width: 8.5 inches.
Wheelbase: 24.75 inches.
Tail: 2 inches.
Nose: 1.75 inches.
Concave: None.
Camber: YES
Graphic: DTS meets Cadillac - dig it.
Other: Stoked on this new DTS flex deck! Great hill bomber that will no doubt work killer when set up with some Tracker RaceTrack trucks and a set of tall soft wheels. This deck is a 5 ply with the polymer weave fabric/material (same as pool king) on the top and bottom. A great new addition to anyone's quiver. Actual colors may vary.
| SOLD OUT - $55.95 | view cart / checkout |

Dogtown OG Bull Dog Deck

A great affordable retro rider, get one while they are available!

10" x 30.25
"

*Add custom cut DT grip for only $14.00. This grip is exclusive to tailtap.com, you can not get it anywhere else but here!
| BUY NOW - $66.50 | view cart / checkout |
| With Grip - BUY NOW - $80.50 | view cart / checkout |

Dogtown OG Red Dog Deck

Slightly smaller than the OG Bull Dog model but every bit as fun to ride.

9" x 30"

*Add custom cut DT grip for only $14.00. This grip is exclusive to tailtap.com,. you can not get it anywhere else but here!
| BUY NOW - $66.50 | view cart / checkout |
| With Grip - BUY NOW - $80.50 | view cart / checkout |

Dogtown - Wes Humpston Big Foot Model

Construction: 7 ply maple, pressed in LA, California.
Length: 31 inches
Width: 12 inches.
Wheelbase: 15.5 inches.
Tail: 6.75 inches.
Nose: 3.75 inches.
Concave: Very slight.
Graphic: Dead on original!
Other: This is as close to the original as you can get! If you ever wanted to ride one of these monster decks back in the day - NOW is your chance. Our Big Foots will sell out quickly, don't spend too much time thinking about it if you are considering buying one. These Big Foot re-issues are just insanely authentic, and like they say "don't delay order today"! or be sorry tomorrow.
| BUY NOW - $89.95 | view cart / checkout |

Dogtown - J.J. Florence Model

Construction: 7 ply maple, pressed in LA, California.
Length: 27 inches.
Width: 8 inches.
Wheelbase: 13.75 inches.
Tail: 4.25 inches.
Nose: 3.5 inches.
Concave: Yes.
Graphic: Two thumbs on this one, killer DT'ish style art
Other: These smaller wheelbase, surfboard styled skate decks are quickly becoming the rage along the west coast. Super snappy super fun mini cruisers. Check one out.
| BUY NOW - $55.95 | view cart / checkout |

Temporarily Sold Out

Dogtown - Ford Archbold Model


Construction: 7 ply maple, pressed in LA, California.
Length: 28.25 inches.
Width: 8 inches.
Wheelbase: 13.75 inches.
Tail: 5.75 inches.
Nose: 4.5 inches.
Concave: Yes.
Graphic: Bamboo, skulls and anarchy- a winner in our book!
Other: Another great snappy boardwalk bomber from Jim Muir and his crew at DogTown. The DT Ford model, with it's round tail and pointy nose, looks like somebody put thier west coast summer beach break surfboard in the shrinking machine! Buy one today, you'll dig it!
| SOLD OUT - $55.95 | view cart / checkout |

Dogtown Longboard - Matt Archbold Model

Construction:
7 ply maple, pressed in LA, California.
Length: 36.75 inches.
Width: 9.25inches.
Wheelbase: 23.5 inches.
Tail: 7 inches.
Nose: 2.25 inches.
Concave: None, deck has a camber / reverse rocker
Graphic: Grills, girls and pin stripes - a winning combination!
Other: This is a great, all-around rider that would be great for cruising the strand at day and picking up coldies at night. Long, stable, classic shape and pinned with some first class graphics, this Archy deck is a winner.
| BUY NOW - $64.95 | view cart / checkout |

Dogtown Longboard - Dogtown For Life Model

Construction: 7 ply maple, pressed in LA, California.
Length: 39.5 inches.
Width:  9.25 inches.
Wheelbase: 21.5 inches.
Tail: 7.25 inches.
Nose: 7 inches.
Concave: Smooth and even throughout. Very nice.
Graphic: Tattoo inspired - vida loca.
Other: Nice addition to the new generation DT deck line.  This Longboard is perfect for those slightly unsober beer store runs or for checking surf at your local break.  With its 21.5 inch wheel base this deck is super cruiser that will smooth out any bumps along the way.









.
| BUY NOW - $64.99 | view cart / checkout |
.
.