• 40" x 9.25"
• Wheelbase 22"
Check out this new crazy longboard from G&S! This is a heavyweight, in terms of length, measuring in at a whopping 40 inches! This cruiser is going to carry some speed! You are going to need that 22 inches of wheelbase when you get this bad boy headed downhill. Beautifully hand crafted in San Diego, California, a truly first class deck from the first class folks at G&S Skateboards.
• 29.5" x 9.5"
We're stoked to have these available! Steve Claar in the mid to late 80's had some of the most stylish ollies and inverts in the business and he did it riding this exact deck. This was Steve's first pro model with G&S and the graphics were penned by Art and Steve Godoy. This is a great re-issue deck for the wall and even better deck for riding, grab one!
G&S Black Tip Model
• 44" long
• 8.75" wide
• Adjustable wheelbase
This is a nice, made in the USA longboard by G&S. The Black Tip features concave and a slight camber. Cutaways under the front truck area allows for plenty of wheel clearance for the skaters out there that like to run larger size wheels and the pin tail leaves plenty of room in the back. Another first class, made in San Diego downhill carver and boardwalk bomber.
G&S Fibreflex Classic Slalom Re-issue
This great looking retro re-issue is 28" long by just 6" wide. It has camber to it and no kicktail, just like the 70's version. It has the custom diecut griptape and old school bolt holes and is of course hand made right here in San Diego, California, just blocks away from where the originals were once produced. You will want to grab one of these! Set it up with Tracker classic MidTracks and 3dm's Cambria model wheels. This board will transport you back to 1978.
G&S Fibreflex Teamrider
Another fantastic re-issue from Debs and her crew down at Gordon and Smith. These Teamrider decks are 5 plys with a clear fiberglass top and bottom. Its 7-3/4" wide by 30" long with a 16.5" wheelbase. Made in true Gordon and Smith tradition the Teamrider decks are hand made in San Diego, California and are first class looking decks. All decks arrive with custom G&S die cut grip tape applied. Please specify first, second and third color choice at checkout.
G&S 24"
Winger Complete
Available as a complete or deck only!
A fun retro rider for skaters of any age! Our G&S Winger completes are
assembled with Tracker's MidTrack model trucks, Tunnel Rock wheels, .25
inch riser pads and precision bearings. This smaller deck is a blast to
to rip around the streets on and is built using only the finest made-in-the-USA
components. Each deck is hand assembled to order and arrives at your door
step gripped, tuned and and ready to rip! Please specify wheel hardness/color
at check out.
Deck only option also comes with custom grip. Actual deck color may vary.
Available as a complete or deck only!
This is a fun one! Our 26 inch G&S Magic Fish complete is like none other! A killer set up that will bring smiles to anyone who rides it. Built with Bennett 4.375 Vector model Truks, 3DM 62mm x 84 durometer wheels, .25 inch riser pads and precision bearings this set up not only looks fast, it IS fast! As with all of our completes, these set ups are hand built to order in our So Cal shop and arrived to you gripped and ready to rip.
Deck only option also comes with custom grip. Actual deck color may vary.
Great looking, long and lean new deck from Gordon and Smith! The "Woody" measures in at 28" x 6.25", features a camber and has custom cut G&S grip tape already applied. The Woody is best set up with the Tracker MidTrack model trucks and a set of soft wheels. With a wheelbase of just under 19 inches this will be a stable ride at higher speeds. Woodys are made in a variety of stain colors that G&S changes often and each is unique and old school looking. Keeping with the old school tradition, the G&S name is branded into the bottom layer of wood. A great looking, high quality skateboard that's made right here in San Diego, California. Please specify color choice at checkout.
Colors available: yellow, green, red, blue
G&S
Warp Tail Retro Rider!Another tailtap exclusive! Limited production, get one while you can.
Our Stacy Peralta Warp Tail II complete skateboards not only look amazing, they ride great as well! These completes are built with the new, recently re-issued Bennett Vector model truks, white Cambria wheels, precision bearings, .25 inch riser pads and they will arrive to your door step taped and ready to roll. With the quick turning Bennett's and grippy Cambria wheels, this set up is 100% fun! Three thumbs up from the Tap staffers.
Another fantastic re-issue from David and Debs down at G&S. The Foil Tail made it's debut in the early 80's. I used to skate with this guy named Mike Hill back in 83 or 84 and he rode for G&S (he later went on to start Alien Workshop) so he always had the sweet G&S set ups. The Foil Tail was one such set up and Mike did these boosted fast plants, like head high on these dinosaur style flat planks. He had his Foil Tail set up with Gullwings, copers, rails and perhaps even a nose bone. Back to this re-issue though, measuring in at 29.5" x 10.5" with a 16 inch wheelbase and a hint of concave, it's good to go. Suggested set up: Tracker Classic SixTracks, Gyro wheels and .50 inch risers. Note these are drilled old school style so keep it real and bolt on some vintage Gullwings, Trackers or Indys if you can find them.
We have been waiting for these Miller's to arrive for some time now and finally we have them on or shelves. Hard to believe we used to ride these things and even harder to believe what Miller could do with it! Pretty much flat, a single kick, heavy, short tail and basically void of any nose. But man, could Chris make his board fly back when this deck first came out. The Miller re-issue specs out like this: 30" x 10" with a 16.25" wheelbase, 5.5" tail and a 2.75" nose. That 10" x 30" size was the standard for that era. What set boards apart was their shape and this Miller was a popular one with its flowing fish like shape. I am sure G&S must have sold thousands of these decks when they first came out as Chris Miller was, and still is, one of the most talented and flowing skaters ever to set foot on a 7-ply. These won't last so don't sleep, get one today.
We have been waiting for this one for some time and they have finally arrived. Hats off to David and Debs over at G&S for taking the time and putting forth the energy to re-produce these very accurate Billy Ruff re-issue decks. The Ruff measures up like this: 29" long x 10" wide with a snubbed nose(of course), a 6" tail and a wheelbase of 16.25". Concave is very very slight and it has a single kick. If you rode one of the originals you'll want one, and if you never did, now is your chance. These decks are drilled with the old school bolt pattern(thank you) and feature front and back wheel wells along with the classic G&S logo printed on the top side. With our unsigned Ruff's costing only $64.99, we hope these get used and enjoyed at the park and on the streets. For you collectors out there we do have a handful of signed decks available. Billy signed a total of 100.
*Update - we just sold out of the signed Billy Ruff decks. We do still have some unsigned decks available.
G&S Fibreflex Bowlrider
A timeless skateboard - it`s the FibreFlex Bowlrider!! It's a flexy 3 ply with old school bolt holes and is 29" long by 7.5" wide with zero concave and custom diecut griptape. These are beautifully crafted decks made in San Diego, California that feature Bow Tuff tops and bottoms - just like the 1970's originals. Don't miss out on these, grab one while you can!!
*Assorted stain colors - please specify first, second and third color choice at checkout.
G
& S - Stacy Peralta Warp Tail 2 Deck
Construction: 7 ply maple. Pressed in San Diego,
California USA.
Length: 28.5 inches.
Width: 7 inches.
Wheelbase: 15.5 inches.
Tail: 4.75 inches.
Nose: 3 inches.
Concave: Flat - no concave with a slight kick.
Graphic: Branded!
Other: These re-issues are amazing! Old school
hole pattern, correct style wheel wells, branded, "foot hook"
style kick tail and shipped to you pre-gripped with a top logo. Hats off
to the Debbie Gordon and David for re-creating these fantastic decks. Set
yours up with Tracker MidTrack "classic" trucks and a set of soft
wheels and enjoy the ride. Colors available: red, orange, blue, yellow.
Alva
|
American Nomad
|
Arbor Sports |
Birdhouse
|
Blockhead
|
BDS
|
Buddy
Carr Skateboards
Designarium
|
Dogtown
|
EarthWing
|
Edger
|
Flip
|
G & S
| GFH
|
Gravity |
Hosoi
|
Liberty
|
Madrid
Myrtle
|
Old
Man Army
|
Pocket
Pistols
|
Pool
King
| Poolside
|
Powell
|
Rebel
Skates
|
Santa
Cruz
Santa Monica Airlines
|
Scum
| Shut
| Skate
Designs
| Tracker
|
Tunnel
| Vision
| Z
Flex
.
