Tracker Trucks
The
All New Tracker Fastrack
An entirely new design from inside out Tracker once again sets a new standard. The new FasTracks have taken little more than a year from simple sketches on paper to full on production and we couldn't be happier with the end results. Below are just a few features of the all new Tracker FastTack, but don't just take our word for it, try a set and see for yourself why so many are making the switch to the all new Tracker Fastrack.
Fastracks feature an oversized, high rebound upper and lower cushion and have a built in "seat" so that standard size cushions work as well, thus allowing riders to fully tune their set up. Hangers have been engineered to "flip" for even more individual tuning options. Scaled down baseplates save on weight without sacrificing strength and feature 6 holes to accommodate both old and new school bolt patterns.
Only Grade A prime 356 aluminum is used in the sand casting process - you can count on Trackers legendary strength. Proudly hand made in Southern California. Available in either 150mm or 180mm.
An entirely new design from inside out Tracker once again sets a new standard. The new FasTracks have taken little more than a year from simple sketches on paper to full on production and we couldn't be happier with the end results. Below are just a few features of the all new Tracker FastTack, but don't just take our word for it, try a set and see for yourself why so many are making the switch to the all new Tracker Fastrack.
Fastracks feature an oversized, high rebound upper and lower cushion and have a built in "seat" so that standard size cushions work as well, thus allowing riders to fully tune their set up. Hangers have been engineered to "flip" for even more individual tuning options. Scaled down baseplates save on weight without sacrificing strength and feature 6 holes to accommodate both old and new school bolt patterns.
Only Grade A prime 356 aluminum is used in the sand casting process - you can count on Trackers legendary strength. Proudly hand made in Southern California. Available in either 150mm or 180mm.
| BUY
NOW -
150mm -
$48.00 per set of
2 | view
cart / checkout |
| BUY
NOW -
180mm -
$48.00 per set of
2 | view
cart / checkout |
Just
in - Tracker Multi Wing and Kevin Staab Pirate Logo Trackers
These custom wrapped Trackers are first powder coated and then dipped in a patented process that applies the logo around the entire truck. Virtually seamless, mega durable, fade resistant and highly visible these trucks are like bling for your board. Grab a set, they are produced in very small batches and sell out quick.
These custom wrapped Trackers are first powder coated and then dipped in a patented process that applies the logo around the entire truck. Virtually seamless, mega durable, fade resistant and highly visible these trucks are like bling for your board. Grab a set, they are produced in very small batches and sell out quick.
| SOLD
OUT -
Multi Wing 149mm -
$63.00 per set of
2 | view
cart / checkout |
| BUY
NOW -
Staab Pirate 149mm -
$63.00 per set of
2 | view
cart / checkout |
| SOLD
OUT -
Multi Wing 161mm -
$69.00 per set of
2 | view
cart / checkout |
| BUY
NOW -
Staab Pirate 161mm -
$69.00 per set of
2 | view
cart / checkout |
Just
in! Classic Tracker SixTracks - Back In Stock!
Limited run of Classic Tracker SixTracks from our 1980's molds! This run of Classic SixTracks feature hangers and base plates cast from original molds, both of which have been polished to high luster shiny finish. Our Classic Tracker SixTracks are built with black upper and lower cushions and our base plates are drilled using the original old style four hole pattern. These Classic SixTracks are built to ride and, as with all Tracker Trucks, come with a full guarantee. Hanger length: 6 inches. Axle length: 8.78 inches.
Limited run of Classic Tracker SixTracks from our 1980's molds! This run of Classic SixTracks feature hangers and base plates cast from original molds, both of which have been polished to high luster shiny finish. Our Classic Tracker SixTracks are built with black upper and lower cushions and our base plates are drilled using the original old style four hole pattern. These Classic SixTracks are built to ride and, as with all Tracker Trucks, come with a full guarantee. Hanger length: 6 inches. Axle length: 8.78 inches.
| BUY
NOW - $60.00 per set | view
cart / checkout |
Classic
Tracker Ex-Tracks - Back In Stock!
We just finished building this limited run of Classic Tracker Ex-Tracks. Many of you remember riding these on "Pig" style boards in the early 80's. We poured these from the original molds and have built them with original Tracker, old school style base plates. These are drilled with the old school bolt pattern only! Both the hanger and base plate have been polished and they feature black upper and lower cushions. Our Ex Tracks are made to be ridden and, as with all Tracker Trucks, come with a full guarantee! Hanger length: 5 inches. Axle length: 8 inches.
We just finished building this limited run of Classic Tracker Ex-Tracks. Many of you remember riding these on "Pig" style boards in the early 80's. We poured these from the original molds and have built them with original Tracker, old school style base plates. These are drilled with the old school bolt pattern only! Both the hanger and base plate have been polished and they feature black upper and lower cushions. Our Ex Tracks are made to be ridden and, as with all Tracker Trucks, come with a full guarantee! Hanger length: 5 inches. Axle length: 8 inches.
| BUY
NOW - $60.00 per set | view
cart / checkout |
Sold
Out!
Torch Trucks
These trucks rule! The hangers actually spark when they grind any semi rough surface like pool block, curbs and ledges. Torch hangers are loaded with quarter inch sparking flints that send a serious shower of sparks flying. We have tested these for months and they turn, ride and last just as long as any typical skate truck. Torch Trucks are made in the USA by the people at Tracker Trucks, which means you are guaranteed quality and craftsmanship. Currently the only size available is a 129mm(7.5 inch). Tailtap.com will be one of the first sites to offer the wider Torch Trucks when they become available so check back often!
.
Torch Trucks
These trucks rule! The hangers actually spark when they grind any semi rough surface like pool block, curbs and ledges. Torch hangers are loaded with quarter inch sparking flints that send a serious shower of sparks flying. We have tested these for months and they turn, ride and last just as long as any typical skate truck. Torch Trucks are made in the USA by the people at Tracker Trucks, which means you are guaranteed quality and craftsmanship. Currently the only size available is a 129mm(7.5 inch). Tailtap.com will be one of the first sites to offer the wider Torch Trucks when they become available so check back often!
.
|
SOLD
OUT - $26.00 ea. | view
cart / checkout |
Tracker
FulTrackDue to numerous requests for the classic Tracker FulTracks, Tracker has tooled up, cast, and assembled the original FulTracks again! The FulTrack hangers and baseplates are cast from original molds, and the baseplates feature the old school mounting hardware pattern. The hanger length of the FulTrack is 106 mm. These trucks have been assembled with black upper and lower cushions for better authenticity and both the hanger and the base are high-polished, just like they were in 1978. We do expect that these will sell quickly so if you are thinking of purchasing a set we suggest you do it quick. Limited availability.
*Note, the baseplates are drilled for old style bolt pattern only.
.
|
BUY
NOW - $30.00 ea. | view
cart / checkout |
Tracker
MidTrackManufactured for the upcoming Lords of Dogtown movie!
These are just like the very early Tracker MidTracks of the late 1970's and early 80's. The hangers are high polished to beautiful shiny finish and feature Tracker's second generation "gnarly" style pivot. The baseplates are cast from original molds and feature the old style bolt pattern only. The baseplates are also polished to a beautiful chrome-like finish and assembled with the utmost care. These MidTracks have been built with the original barrel style lower cushion and a traditional tall conical top cushion. Limited availability.
*Note, the baseplates are drilled for old style bolt pattern only.
.
Tracker
Custom Offset Limited Edition Racetrack Model - Out of Stock
This is the truck used by Charlie Ransom to win the 2002 World GS Championship. Made in limited runs, only a few times per year, the Tracker adjustable width offset RT-X and RT-S features axles that are longer, which allow you to adjust the track width from 88mm to 112mm. Each truck comes equipped with Tracker's hardened bronze 4mm spacers on each side of the axle. Try a combination of different size washers and spacers along with wheels until you find the right set up for any hill. Expensive? Yes, but when world championships are won by a fraction of a second, every ounce of performance matters. Steering + traction is the formula for winning races, and the new Tracker adjustable width offset trucks deliver just that. Note: Always use the thick Tracker 1/4-20 lock nuts provided and check that your washers stay centered on the shoulder of the axle.
.
This is the truck used by Charlie Ransom to win the 2002 World GS Championship. Made in limited runs, only a few times per year, the Tracker adjustable width offset RT-X and RT-S features axles that are longer, which allow you to adjust the track width from 88mm to 112mm. Each truck comes equipped with Tracker's hardened bronze 4mm spacers on each side of the axle. Try a combination of different size washers and spacers along with wheels until you find the right set up for any hill. Expensive? Yes, but when world championships are won by a fraction of a second, every ounce of performance matters. Steering + traction is the formula for winning races, and the new Tracker adjustable width offset trucks deliver just that. Note: Always use the thick Tracker 1/4-20 lock nuts provided and check that your washers stay centered on the shoulder of the axle.
.
RT-S
BUY NOW - $120.00 ea. | RT-X
BUY NOW
- $120.00 ea. | view
cart / checkout
Tracker
RT-S & RT-XOver the years, slalom and downhill racing has been enjoyed by many and Tracker has been the truck of choice by racing champions throughout those years. The Tracker RaceTrack series trucks are the modern day versions of the original Tracker Mid and FulTracks. The Tracker RT-S model is stable and quick and has the stability of a full contact pivot point. It was designed to be used as a rear "traction" truck, one that provides greater stability and increased rider control. These RT-S model trucks are hand assembled using Tracker's exclusive hourglass bottom cushions, a taller top cushion and a slightly longer kingpin for more fine tuning and adjustments. The RT-S model is available in 85mm, 106mm, 129mm, 139mm and 149mm.
The Tracker RT-X model truck is quick and loose, has a high roll center and a straight point pivot for a more "tippy" turn. The RT-X was designed to be used as a front steering truck, one that gets the rider into and out of a turn quickly and predictably. Each RT-X is hand assembled using Tracker's exclusive hourglass bottom cushion, taller top cushion and a slightly longer kingpin for fine tuning and adjustments. The RT-X is available in 106mm, 129mm, and 139mm.
The combination of the loose RT-X in the front, coupled with the traction qualities of the RT-S in the rear, make the average weekend warrior feel like a true world champion.
.
Tracker
149
The
Tracker 149mm pool and park truck is the perfect size truck for all 8.5 inch
decks. As with all Trackers the quality is, of course, first class. Turning
on the 149mm Tracker is smooth, consistent and predictable.
Tracker
161 SixTrack
What
more can be said? Trackers long standing reputation for quality and durability
still shines. This Tracker SixTrack is the reincarnation of the original Tracker
Sixtrack of the early 80's. This next generation Tracker Sixtrack is wider
and and the steering has been increased by 5 degrees to give you slightly
more turn but with out sacrificing stability. The new Tracker SixTrack measures
9 inches from axle to axle and comes with a six hole base plate pattern to
fit old school and new school style drilled decks.
.
149 BUY NOW - $14.95 ea. | 161 BUY NOW - $19.95 ea. | view cart / checkout
Tracker 184
The
Tracker 184mm is a big truck, from axle to axle it measures
in at 9.75 inches! The truck works great with any of the 10 inch pig decks
that many of the deck manufacturers are pressing these days. Like all of our
Trackers, they are built with Tracker Super Ball cushions and the turn is
smooth and responsive.
Tracker
219
The
Tracker 219mm has got to be one of the widest trucks available.
From axle to axle this monster measures in at 11 inches wide! If you are riding
a 12 inch pig, this would be your truck of choice.
.
